Impinj’s Speedway Antenna Hub provides a low cost opportunity to create a large, contiguous RFID read zone.

GPIO adapter for Multiplexer Antenna Hub

Height: 690 mm Bollard: ø 140 mm Connection tube: ø 200 mm Base plate (LxLxA): 220 mm x 170 mm x 8 mm Standard lengths: 2 m, extendable 2 m each. Mounting of the base plate using ground anchors. Mounting material included in delivery.

Photoelectric sensor - XUK - diffuse - Sn 1 m - 12...24 Vdc - M12.

Height: 600 mm / 900 mm / 1.100 mm Bollard: ø 200 mm Base plate: 220 mm x 220 mm x 10 mm Mounting of the base plate using ground anchors. Mounting material included in delivery.

Height: 690 mm Bollard: ø 140 mm Connection tube: ø 200 mm Base plate (LxLxA): 220 mm x 170 mm x 8 mm Standard lengths: 2 m, extendable 2 m each. Mounting of the base plate using ground anchors. Mounting material included in delivery.

Dimensions: 600 mm / 900 mm / 1.100 mm Bollard: ø 140 mm Base plate: 180 mm x 180 mm x 8 mm Mounting via base plate using ground anchors. Mounting material included in delivery.

The "Type N Male - TNC Female" adapter is a common type of RF (Radio Frequency) adapter used to connect cables, antennas, and other devices that use Type N and TNC connectors.

RFID Antenna Accessories. Antenna Cables & Adaptors.

Kathrein R-RPA 24VDC-90W AC 110-230V, DIN Rail mount.

Kathrein R-POE-INJ-30 PoE+ Injector, 30W, 100Mbit.

Kathrein R-ETH-SW-100 PoE+ Ethernet Switch, 4Port.

It provides solutions such as tool tracking, smart shelves, and inventory lockers, which require reading zones. The Impinj R700 antenna hub expands the number of antennas that can connect to an Impinj R700 reader by allowing eight antennas to connect to one antenna port for a total of 32 antennas per reader.

The Speedway Revolution GPIO Box is designed for use with the Speedway Revolution RFID reader to provide easier access to the reader’s GPIO port.