Impinj’s Speedway Antenna Hub provides a low cost opportunity to create a large, contiguous RFID read zone.

Our rugged Windows tablet is resistant to shocks, water and dust, ensuring maximum reliability in harsh environments. With advanced features such as a long battery life and a high visibility screen, this device is the ideal choice for those looking for safety and efficiency in every situation.

The Speedway Revolution GPIO Box is designed for use with the Speedway Revolution RFID reader to provide easier access to the reader’s GPIO port.

GPIO adapter for Multiplexer Antenna Hub

The Impinj PoE+ Midspan Power Injector 30W 56V (without AC power cord).

It provides solutions such as tool tracking, smart shelves, and inventory lockers, which require reading zones. The Impinj R700 antenna hub expands the number of antennas that can connect to an Impinj R700 reader by allowing eight antennas to connect to one antenna port for a total of 32 antennas per reader.

The Impinj R700 water-resistant case, with an IP54 rating, adds protection from dust and water spray.

Thermal conveyor belt, 5319 wax, for Midrange/High End printers; Roll width: 110 mm, Core: 25.4 mm, Length: 450 m; Box containing 6 Ribbons;

Power supply required for Speedway R420, R220 and Speedway XPortal if POE (Power other Ethernet) is not used.

Thermal conveyor belt, 2100 wax, for Midrange/High End printers; Roll width: 110 mm, Core: 25.4 mm, Length: 450 m; Box containing 12 Ribbons;

Impinj Gateway in-ceiling kit.

Thermal conveyor belt, 2100 wax, for Midrange/High End printers; Roll width: 156 mm, Core: 25.4 mm, Length: 450 m; Box containing 12 Ribbons;

The Speedway Reader Console Cable is used to connect to the Impinj RShell Management Console through the serial console port on Speedway Readers and Gateways.

Thermal conveyor belt, 2300 wax, for Midrange/High End printers; Roll width: 110 mm, Core: 25.4 mm, Length: 450 m; Box containing 12 Ribbons;

Dimensions: 600 mm / 900 mm / 1.100 mm Bollard: ø 140 mm Base plate: 180 mm x 180 mm x 8 mm Mounting via base plate using ground anchors. Mounting material included in delivery.

This power cord is used for the Impinj power supply. Please mind the specific regions.

Thermal conveyor belt, wax; Roll width: 110 mm, Core: 25.4 mm, Length: 450 m. Box containing 18 Ribbons;

Height: 690 mm. Bollard: ø 140 mm. Connection tube: ø 200 mm. Base plate (LxLxA): 220 mm x 170 mm x 8 mm. Standard lengths: 2 m, extendable 2 m each. Mounting of the base plate using ground anchors. Mounting material included in delivery.

Power supply AC - DC 15W 12Vdc OUT.

Thermal conveyor belt, 3200 wax/resin; Roll width: 110 mm, Core: 12.7 mm, Length: 74 m; Box containing 12 Ribbons;

Height: 600 mm / 900 mm / 1.100 mm Bollard: ø 200 mm Base plate: 220 mm x 220 mm x 10 mm Mounting of the base plate using ground anchors. Mounting material included in delivery.

ETH cable with M12-D Coded (male) and RJ45 .

Thermal conveyor belt, 5555 wax/resinRoll; width: 110 mm, Length: 30 m; Box containing 10 Ribbons;